特种柔性水冷电缆（单晶硅、多晶硅、中频感应炉）
1、电缆头采用紫铜锻造，无触点、无焊点、无沙眼、无焊缝，品种多、规格全，其结构形式有无触点型、水冷却型、旋转型三种结构，进出口水嘴结构是加密封圈的或丝扣连接结构，更换方便。
2、软体导线：是高强度T2铜线，柔软、弯曲半径小，不易折断。
3、电极与软体导线的连接，用大型液压机和专业模具冷压连接，接触好，电阻小。
4、外护套绝缘管，使用优质橡胶管，天然橡胶含量高，柔软，使用寿命长，耐工作水压0.95MPA,耐工作电压2300V。
5、电极与外护套绝缘管的密封紧固，每端一个不锈钢卡箍，用专业设备挤压紧固，无磁性、不生锈、美观、耐用、密封效果好。
1.Cable head adopts red copper forging, non-contact, no solder joints, no trachoma, no weld, wide varieties, full specifications, with three structures: non-contact type, water cooling type, rotary type, water inlet and outlet are sealing ring or threaded connection structure, easy to change.
2. Software wire: high-strength T2 copper wire, soft, small bending radius, not easily broken.
3. Connection between electrode and software wire using large hydraulic press and professional mold cold-press connection, with good contact and small resistance.
4. Outer sheath pipe insulation uses high quality rubber with high natural rubber content, soft, long service life, 0.95 MPA work water resistant and 2300 v operating voltage.
5. Electrode and outer sheath insulation tube sealing is secured, each end is equipped with a stainless steel band, squeezing fastening with professional equipment, nonmagnetic, no rust, beautiful, durable and good sealing.
